Sebaka sa Kopo
CWZX-50E e ka leka le ho sekaseka thepa ea mochini ea litšepe tse fapaneng, tse se nang tšepe le lisebelisoa tse kopaneng.E sebelisoa haholo sebakeng sa sefofane, petrochemical, ho etsa mechini, lithapo, likhoele, masela, likhoele, polasetiki, rabara, ceramics, lijo le meriana.Bakeng sa ho paka, liphaephe tsa aluminium-plastiki, mamati a polasetiki le lifensetere, li-geotextiles, lifilimi, lehong, pampiri, lisebelisoa tsa tšepe le tlhahiso, mochini oa tlhahlobo ea elektroniki o ka fumana boleng ba matla a teko le matla a ho senya ho latela GB, JIS, ASTM, DIN. , ISO le litekanyetso tse ling Lintlha tsa tlhahlobo tse kang boleng, matla a tlhahiso, matla a lihlahisoa tse holimo le tse tlaase, matla a ho tsitsa, matla a ho hatella, ho lelefatsa nakong ea khefu, modulus e tsitsitseng ea elasticity, le flexural modulus ea elasticity.
Likarolo tsa Bohlokoa
1) Teko ea matla:
Teko ea matla eo e leng ea teko e senyang e sebelisoa haholo-holo ho lekanya deformation ha Sample e laetsoe ka khatello e phahameng kapa matla a sithabetsang.
2) Teko ea Boleng ea Kamehla:
Ho na le li-parameter tse peli tse lokelang ho beoa tekong ea boleng bo sa feleng: Load force value le Deformation value.Mosebelisi a ka beha e le 'ngoe kapa ka bobeli ho latela tlhoko e sebetsang;Measurement e phethehile ha parameter efe kapa efe e fihla ho boleng bo behiloeng.
3) Teko ea Stacking:
Stacking Test e sebelisetsoa ho hlahloba hore na sampuli e ka mamella khatello e sa khaotseng ka nako e fanoeng.Beha liparamente tse peli: Matla a hatellang le nako ea teko (hora).Ha teko e Qala, tsamaiso e tla hlahloba khatello ea hona joale ka nako leha e le efe ho netefatsa boleng bo behiloeng;Mehato e phethehile ha nako ea teko e felile kapa boleng ba deformation bo feta se behiloeng Ka nako ea teko.
4) Sistimi ka kakaretso e ts'oana hantle, e eme le lebelo le phahameng la ho khutla.
Ho ea ka Standard
TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642
| Nomoro ea mohlala | CYDZW-50E |
| Matla a teko (kN) | 50 |
| Lethathamo la tekanyo ea matla a teko | 0.4%~100%FS (sekala se felletseng) |
| Sehlopha sa ho nepahala | Boemo ba 1 kapa 0.5 |
| Qetella qeto | Li-yards tse 400,000, ts'ebetso eohle ha e arotsoe ka lifaele, qeto ha e fetohe |
| Lethathamo la tekanyo ea deformation | 2% ~ 100% FS |
| Phoso e amanang le sesupo sa deformation | Ka hare ho ± 1%, ± 0.5% ea boleng bo bontšitsoeng |
| Qeto ea deformation | Li-yards tse 4000000, ts'ebetso eohle ha e arotsoe ka lifaele, qeto ha e fetohe |
| Lebelo la taolo ea matla a teko | 0.01~50 kN/s |
| Lebelo la taolo ea deformation | 0.002 ~ 0.5mm/s |
| Lebelo la lebelo la teko | 0.001~500mm/min |
| Beam stroke | 1200 limilimithara |
| Bolelele bo sebetsang ba compression | 900 limilimithara |
| Bophara bo sebetsang ba teko | 800 limilimithara |
| Matla | 380V, 4kw |
